Factory Reset Linksys Velop: Stepwise Process and Troubleshooting

Despite the advanced features of smart networking devices like Linksys Velop, some users face various issues with these gadgets. So, it requires immediate troubleshooting for the optimal functioning of the mesh wifi. Likewise, the factory reset Linksys Velop is one such effective way to resolve common issues if none of the other techniques work.

Therefore, in this blog post, we provide in-depth information on the reset Linksys Velop process. It also includes details about the key requirements for resetting, stepwise procedures, and some proven troubleshooting tips. So, read this guide thoroughly.

When You Should Reset Linksys Velop?

As discussed previously, when the users face certain errors while using the Linksys Velop systems and all other measures fail, then you need to reset it. Usually, users face various issues like continuous network connectivity issues, firmware issues, admin access failure, etc.

Therefore, when the users come across such errors, and temporary fixes are not enough to fix them, then they need to proceed with the reset. Despite this, a reset is also performed to ensure the security of your device, when you sell or buy a new device.

What Are the Requirements for Resetting the Linksys Velop?

Before you head to factory reset Linksys Velop node, you need to have the below-listed basic things with you:

How to Factory Reset Linksys Velop?

Although there are several other proven methods to resolve the aforementioned errors associated with the Linksys Velop systems. Still, sometimes users are annoyed with the persistent issues that are not resolved by them.
Thus, Hard Reset Linksys Velop is left as the only viable option at that time. Usually, there are three methods to carry out this process, which are explained in detail below:

Resetting the Linksys Velop Using the Reset Button

Firstly, ensure that all the Velop nodes are turned on including the master router.
Now, locate the reset button at the back or bottom of the Velop system.
Next, press this button using a paperclip, pin, or any other sharp object.
Keep holding this button for 10-20 seconds, until the power turns red and fades in triple pulses.
Release the reset button when the LED turns solid red.
Afterward, wait patiently for a few minutes till the Velop completes rebooting.
Finally, your Velop system comes back to its default settings and now reconfigures it accordingly.

Reset Linksys Velop Via Web Interface

Initially, turn on the Linksys Velop router and the nodes as well.
Now, connect your computer to your router’s wifi network.
Then, open the web browser and enter the “linksyssmartwifi.com” web address in the URL bar.
Mention the admin credentials on the Velop login window.
After login, you visit the smart setup wizard of the router.

Further, go to Administration>Factory Defaults>Restore Factory Defaults>Confirm.
Wait till the router reset itself and the power light turns flashing to solid red.
Finally, your Linksys Velop factory reset process competes.

Linksys App for Resetting the Linksys Velop

To begin with, ensure that your router and child nodes are powered on.
Now, confirm that you are using the updated version of the Linksys app.
Next, launch the app and enter admin login credentials in the login window.
Hereon, you reach the smart Home Dashboard of the Linksys Velop.

Further, navigate the Settings>Administration/Advanced>Factory reset> and Confirm.
Wait for a while till the router comes back to its default settings and restarts again.
Lastly, your factory reset Linksys Velop node process is complete.

Why is Linksys Velop Reset Not Working? Here are the Fixes!

Usually, the Linksys users face certain unforeseen issues caused by network connectivity issues, power outages, signal interference, etc. So, if you’re also having such errors while resetting your Linksys Velop, try out the below-given troubleshooting tips:

Ensure that you have a stable wifi network with good signal strength.
Check that the cable connections are tightened enough.
Find that all the hardware devices, power cables, adapters, etc. are in good condition.
Make sure that the devices are getting enough power supply and that power sources are working well.
Eliminate the network interferences such as mirrors, furniture, EMV gadgets, etc.
Delete the corrupted firmware if present or upgrade the firmware to its latest version by navigating the Advanced Settings.
Stabilize the network by using the wired network (Ethernet cables) connection.
Contact your ISP authorities if you are facing frequent network connectivity issues.

Final Thoughts

Overall, this succinct guide detailed the complete process of factory reset Linksys Velop along with its stepwise procedures. Additionally, the reasons for resetting and the common issues that arise during the process are also highlighted in this guide.

If you still require any further assistance, let us know here!

FAQs

How to Reset a Linksys Velop Single Node?

To reset the single Velop node, first confirm that the node is connected to a power source and is turned on. Then, press & hold the reset button on the back of the node for 10-20 seconds. Release the button when the light on the top of the node turns solid purple or red.